Canon imagePROGRAF iPF650 - Manual (Page 424)

Configuring the IP Address Using imagePROGRAF Device Setup Utility
On a computer running Windows, you can use imagePROGRAF Device Setup Utility provided with the printer to configure
the printer's IP address. This topic describes how to configure the IP address using imagePROGRAF Device Setup Utility.
Important
• To configure network settings, you must be logged in with administrative rights such as Administrator ac-
count. We recommend that your network administrator configure the network settings.
Note
• For instructions on installing imagePROGRAF Device Setup Utility, see "Installing imagePROGRAF De-
vice Setup Utility." →P.407
When specifying an IPv4 IP address
1.
Start imagePROGRAF Device Setup Utility from the start menu.
2.
In the Device Name list displayed, select the printer to configure.
3.
Choose Protocol Settings from the Printer menu.
Windows Software > Device Setup Utility >
Configuring the IP Address Using imagePROGRAF Device Setup Utility iPF650
3
408