Canon imagePROGRAF iPF650 - Manual (Page 799)

Roll Paper is Continuously Ejected
Cause Corrective Action
Although sheets are
selected as the paper
source, a roll was ad-
vanced. After roll ejection stops, follow these steps to reload the roll.
1. Push the Release Lever back.
2. Open the Roll Cover.
3. Using both hands, rotate the Roll Holder toward the back to rewind the roll. At this time,
ensure that both ends of the roll are rewound evenly.
4. Pull the Release Lever forward.
5. Load the roll. At this time, be sure to press the Load button and select Load Roll Paper.
(See "Loading Rolls in the Printer.")
→P.579
Troubleshooting > Problems Regarding Paper >
iPF650 Roll Paper is Continuously Ejected
11
783