Acura 2008 RL - Manual (Page 415)

CONTINUED
Remove the electrical connector
from the bulb by pushing on the
tab and pulling the connector
down.
Remove the bulb by turning it one-
quarter turn counterclockwise.
Remove the left or right side
engine compartment cover from
the side you are working on by
carefully pulling the cover out (see
page
).
If you are replacing the bulb on
the driver’s side, remove the
battery cover (see page
), then
remove the battery hold-down by
removing the two nuts with a 10
mm wrench. Then carefully slide
the battery toward the engine to
access the bulb.
2.
3.
1.
398
428
Lights
Ma
int
e
na
nce
409
NUTS BULB
BATTERY HOLD-DOWN CONNECTOR