Acura 2008 RL - Manual (Page 240)

The chart on the right explains the
error messages you may see in the
display while playing a disc.
If you see an error message in the
display while playing a disc, press
the eject button. After ejecting the
disc, check it for damage or
deformation. If there is no damage,
insert the disc again.
The audio system will try to play the
disc. If there is still a problem, the
error message will reappear. Press
the eject button, and pull out the disc.
Insert a different disc. If the new
disc plays, there is a problem with
the first disc. If the error message
cycle repeats and you cannot clear it,
take your vehicle to a dealer.
Error
Message
Cause Solution
FOCUS Error
Mechanical Error
High Temperature
Press the disc eject button, and remove the
disc(s). Check for an error indication. For more
information, see page 235. Insert the disc(s)
again. If the code does not disappear or the
disc(s) cannot be removed, consult your dealer.
Press the disc eject button, and remove the
disc(s). Check for an error indication. For more
information, see page 235. Insert the disc(s)
again. If the code does not disappear or the
disc(s) cannot be removed, consult your dealer.
Will disappear when the temperature returns to
normal.
Disc Changer Error Messages
234