Acura 2008 RL - Manual (Page 211)

The automatic climate control
system adjusts the fan speed and
airflow levels to maintain the interior
temperature you select.
In AUTO mode, the vehicle’s interior
temperature is independently
regulated for the driver and
passenger. If the driver’s side of the
vehicle is getting too much sun, the
system will adjust to a lower
temperature.
Press the AUTO button.
Set the desired temperature with
the temperature control bars.
You will see AUTO in the display
if the climate mode is selected.
The system automatically selects the
proper mix of conditioned and/or
heated air that will, as quickly as
possible, raise or lower the interior
temperature to your preference.
When you set the temperature to its
lower or its upper limit, the system
runs at full cooling or heating only. It
does not regulate the interior
temperature.
When you change the fan speed, the
fan is taken out of AUTO mode and
starts to run at the selected speed.
You can manually select various
functions of the climate control
system when it is in fully automatic
mode. All other features remain
automatically controlled. Making any
manual selection causes the word
AUTO in the display to go out.
Press the OFF button. However, a
lack of airflow can cause the
windows to fog up. You should keep
the fan on at all times so stale air and
moisture do not build up in the
interior and cause fogging.
1.
2.
Automatic Climate Control Semi-automatic Operation
To Turn Everything Of f
Climate Control System
Fe
a
tu
re
s
205