Acura 2008 RL - Manual (Page 249)

Press this button to cancel the
current screen and return to the
previous screen.
This button switches the display
between day mode, night mode, and
off (see page
).
Press the button to display the set up
screen (see page
) to change and
update information in the system.
Press this button to display the
screen (see page ).
Most functions of the compass
system can be accessed with the
interface dial. The interface dial has
two parts: a knob and a selector.
The knob turns left and right. Use it
to make selections or adjustments to
a list or menu on the screen.
The selector can be pushed left,
right, up, down, and in. Use the
selector to scroll through lists, to
select menus, and to highlight menu
items. When you make a selection,
push the center of the selector in
(ENTER) to go to that selection.
All selections and instructions are
displayed on the screen.
In almost all cases, you can enter a
selection into the system by pushing
in on the interface selector.
Clean the screen with a soft damp
cloth. You may use a mild cleanser
intended for use on liquid crystal
displays (LCDs). Harsher chemicals
may damage the screen.
Shows the radio band, frequency,
volume, the climate control status,
and the time.
249
254
258
Interf ace Dial
Cancel Button
(Display Mode) Button
Set Up Button
Trip Button
Screen
Upper Display
Trip
Computer
Compass System (U.S. model without navigation system)
Fe
a
tu
re
s
243
KNOB
ENTER
SELECTOR