Brother HL 1270N - Manual (Page 86)

8-4
7. The selected print server address will then appear in the smaller box under
Card Address.
8. Type in any desired name for the port (the name must not be the name of an
existing port or DOS device, such as LPT1) and click OK then on the
Printer Ports screen, click Close.
9.
The name you selected in the above step will appear as a checked port in
the list of available ports. Click Next.
10.
Select the correct driver click Next.
11.
Give a name to the printer. If desired, select the printer as the default.
12.
Select Shared or Not Shared. If shared, specify the share name and
operating systems that will be printing to it.
13.
Select whether or not you want a test page, and then select Finish.