Brother HL 1270N - Manual (Page 105)

A-3
SET LOAD HOst
Sets node name of boot host for (NetWare firmware load)
SET LOAD IP aa.bb.cc.dd
Sets IP address of load host (TCP/IP firmware load)
SET LOAD SOftware
Sets host filename of firmware to load
SET PAssword
Sets console password (default password is access)
SET PROtect
Set console protection password to prevent access to SET commands (use UNPROTECT
command to access SET commands)
SET SERVEr Name
Set server node name
SET SERVEr DEScription
Sets node description string displayed with SHOW SERVER command
CLear SERVEr STRing stringnumber
Removes a string number (refer to Appendix B)
SET SERVEr STRing n "..."
Defines server BOT/EOT string (see Appendix B)
SET SERVIce [EN|DIS]
Enable or disables specified protocol on the specified service.
SET SERVIce BOT nn
Set service BOT string to nn (see Appendix B)
SET SERVIce EOT nn
Set service EOT string to nn (see Appendix B)
SET SERVIce FILter nn
Set service filter to nn (see Appendix B)
SET SERVIce FMS
Set service with specified match string number (see Appendix B)
SET SERVIce FRS
Set service with specified replacement string number (see Appendix B)
SET SERVIce NAme
Changes service name