Brother HL 1270N User Manual
Page 107
A-5
TCP/IP Commands
SET IP Access [EN|DIS|ALL] aa.bb.cc.dd {Mask ee.ff.gg.hh}
Allows or prevents specified IP address from accessing print server
SET IP ADdress aa.bb.cc.dd
Sets IP address of print server
SET IP BOot n
Number of BOOTP/RARP tries
SET IP [EN|DIS]
Enables or Disables IP Processing
SET IP RArp nn
Sets procedure used by print server when obtaining its IP address. By default the IP address is
set along with a default subnet mask and a router address that is the same as the address of the
load host. By setting nn to 1, the subnet mask is not set. If nn is set to 2, the router address is
not set. If nn is set to 3, neither the subnet mask nor the router address is set.
SET IP ROuter aa.bb.cc.dd
Sets default router address
SET IP SUbnet aa.bb.cc.dd
Sets subnet mask
SET IP TImeout n
Sets inactivity timeout (minutes)
SET SERVIce
Enable or disables TCP/IP jobs on specified service
SET SERVIce
SET TCP port number (>1023) on service
SHow IP
Shows LPD/TCP/TELNET Parameters
SHow IP ACcess
Shows IP addresses that are allows to access print server
SET IP Method [AUTO|STATIC|DHCP|BOOTP]
Set method of getting IP address