Brother PT-P700 - Manual (Page 34)

Printing labels distributed to multiple printers
30
7
e
Specify the label size to be used for printing.
A. If only one printer has been selected.
In the dialog box from step d, select the printer whose setting is to be specified, and then either double-
click it, or right-click it and click [Settings]. From the [Set Width] drop-down list, select the label size.
NOTE
Information to be displayed in the dialog box from step d can be entered in the [Notes] text box.
B. If multiple printers have been selected.
In the dialog box from step d, select the printers whose settings are to be specified, right-click them and
click [Settings]. From the [Set Width] drop-down list, select the label size. The same label size setting
is applied to all selected printers.
NOTE
The settings below [Printer Settings] and [Notes] are not available.
f
Click [OK] to close the label size setting window.
g
Click [OK] to close the [Distributed Printing Settings] window.
Setup is completed.