Brother DCP-J140W - Manual (Page 4)

4
3
Connect the power cord
a
Connect the power cord.
4
Install the ink cartridges
CAUTION
If ink gets in your eyes, wash it out with water at
once and call a doctor if you are concerned.
a
Make sure that the power is turned on.
The LCD shows:
No Ink Cartridge
b
Open the ink cartridge cover a.
c
Remove the green protective part a.
Important
DO NOT connect the USB cable yet (if you are
using a USB cable).
Note
The Warning LED on the control panel will stay on
until you have installed the ink cartridges.
Note
Make sure you install the Starter Ink Cartridges
included with your machine first.
Note
Do not throw away the green protective part. You
will need it if you transport the machine.
1
11