Brother DCP-J140W - Manual (Page 31)

31
For Network Users
Reset the network settings to factory default
To restore all network settings of the internal Print/Scan server to factory default, please follow the steps below.
a
Make sure the machine is not operating.
b
Press Menu.
c
Press a or b to choose 3.Network.
Press OK.
d
Press a or b to choose 0.Network Reset.
Press OK.
e
Press a to choose Reset.
f
Press a to choose Yes.
g
The machine will restart, and the reset is complete.
Entering Text for Wireless Settings
Press a or b repeatedly to select a character from the list below:
abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
(space)!"#$%&'() +,-./:;<=>?@[\]^_`{|}~
Press Enlarge/Reduce key or Number of Copies key to move the cursor left or right.
Note
Making corrections
If you entered an incorrect letter and want to change it, press Enlarge/Reduce key or Number of Copies key
to position the cursor under the incorrect letter. Use the a and b keys to change to the correct letter, then press
Number of Copies key repeatedly to move the cursor back to the end of the text. If you press the Stop/Exit
key, all letters above and to the right of the cursor will be deleted.