Brother HL-5280DW - Manual (Page 43)

Installing the Printer Driver
41
Mac
in
to
s
h
®
W
irel
ess
Network
Macintosh
®
12
Click Next. The settings will be sent to your
printer. The settings will remain unchanged if
you click Cancel.
Note
If you want to manually enter the IP address
settings of your printer, click Change IP Address
and enter the necessary IP address settings for
your network. After making your selection, click
Next and the Wizard will search for available
wireless networks.
13
Disconnect the network cable between your
access point (hub or router) and the printer,
and click Next.
Note
Wireless communication will not start until you
have disconnected the network cable.
Installing the printer driver
Improper Setup
• DO NOT try to cancel any of the screens during
this installation.
• If your wireless settings fail, an error message
will appear during the installation of printer
driver and the installation will be terminated. If
you encounter this failure, please go to step 1
and setup the wireless connection again.
14
The driver installation starts. Follow the
on-screen instructions and restart your
Macintosh
® .
15
Click Go, then Applications.
16
Double-click the Utilities folder.
17
Double-click the Printer Setup Utility icon.
Note
For Mac OS ® X 10.2 users, open the Print Center
icon.
18
Click Add.
For Mac OS
®
10.2.4 to 10.3 users:
Go to the next step.
For Mac OS
®
10.4 or greater users:
Go to Step 21.
19
Make the following selection.