Brother HL-8050N - Manual (Page 15)

14
Setting Up Your Printer
Step 1
8
Replace the lid of the paper tray.
9
Put the paper tray back into the printer.
Be sure to switch off the power and
unplug the power cord from the
outlet before carrying out the
following steps.
1
Insert the right and left tabs of the face-up
output tray into the holes at the back of the
printer.
If you want to print to the face-up output tray,
push up lever (1) and pull out the extension
tray (2).
The lid of the tray must be firmly seated. If
not, the paper might be misaligned.
Load paper in the lower paper tray in the
same way.
3
Installing the Face-up
Output Tray
The installation of the tray is optional
and is only necessary if you want to
do face up printing.
Face-up output tray
Extension tray