Brother HL-5440D - Manual (Page 136)

130
Troubleshooting
6
l
Make sure that the paper is below the maximum paper mark ( ) in the paper tray. While pressing
the green paper-guide release lever, slide the paper guides to fit the paper size. Make sure that the
guides are firmly in the slots.
m
Put the paper tray firmly back in the machine.
Note
If you turn off the machine during paper jam, the machine will print incomplete data from your computer.
Before you turn on the machine, delete the print spool job on your computer.
n
Make sure that the Paper and Error LEDs are off and that the Ready LED is green.