Brother MW-145BT - Manual (Page 21)

Changing the settings 21
Introd
uc
tio
n
C
re
ati
ng De
si
gns
Ap
pend
ix
The screens may vary depending on the model. The following is the example for the MPrint Utility on a
Windows Mobile
® device.
Setting Items
„ General
1 Auto power-off time
The length of time [auto power-off time] until the printer
automatically powers off can be specified. If "0" is specified, the
printer will not automatically power off.
2 Print command setting (default)
You can select the default print setting, from 3 options, "ESC/P",
"Raster" and "P-touch Template". You should not need to change
this setting. "ESC/P" is selected by default, although "Raster" will
be automatically chosen by the Brother mobile printing software
when appropriate.
„ Bluetooth (1)
3 Auto sleep time
When the Bluetooth switch is set to ON, the length of time [auto
sleep time] until the printer automatically enters the sleep mode can
be specified.
4
Auto sleep/power-off time
When the Bluetooth switch is set to ON, the length of time [auto
sleep/power-off time] until the printer powers off after entering the
sleep mode can be specified. If "0" is specified for the auto sleep
time, the unit will not enter the sleep mode.
5
Power-saving setting
The power-saving setting can be specified.
„ Bluetooth (2)
6 Device name
The device name can be changed.
Specify a name that contains 1-12 alphanumeric characters.
The available parameters differ depending on the
printer model being used.
2
5
3
4
6
1