Brother MFC 9970CDW - Manual (Page 64)

Chapter 7
58
Adjusting Color (Saturation)
7
You can change the default setting for color
saturation.
a
Press (COPY).
b
Load your document.
c
Enter the number of copies you want.
d
Press d or c to display Color Adjust.
Press Color Adjust.
e
Press Red, Green or Blue.
f
Press d to decrease or c to increase the
color saturation.
Press OK.
g
Repeat steps e and f if you want to
adjust the next color. Press
.
h
If you do not want to change additional
settings, press Black Start or
Color Start.
Setting your changes as the
new default
7
You can save the copy settings for Quality,
Brightness
, Contrast and
Color Adjust
you use most often by
setting them as the default. These settings
will stay until you change them again.
a
Press (COPY).
b
Press d or c to choose the setting you
want to change, and then press the new
option.
Repeat this step for each setting you
want to change.
c
After changing the last setting, press
d
or c to display Set New Default.
Press Set New Default.
d
Press Yes.
e
Press Stop/Exit.
Restoring all copy settings to
the factory settings
7
You can restore all the copy settings you
have changed to the factory settings. These
settings will stay until you change them again.
a
Press (COPY).
b
After changing the last setting, press
d
or c to display Factory Reset.
Press Factory Reset.
c
Press Yes.
d
Press Stop/Exit.