Brother MFC 9970CDW - Manual (Page 23)

17
3
3
Additional sending
options
3
Sending faxes using multiple
settings
3
Before you send a fax, you can change any
combination of these settings: duplex fax,
contrast, resolution, overseas mode, delayed
fax timer, polling transmission, real time
transmission, broadcast, glass scan size or
cover page settings.
a
Press (FAX).
The LCD shows:
b
Press d or c to display a setting you
want to change and press the setting,
then press the option you want.
c
Do one of the following:
 Repeat step b to change more
settings.
 If you are finished choosing settings,
go to the next step for sending your
fax.
Note
• Most settings are temporary and the
machine returns to its default settings after
you send a fax.
• You can save some of the settings you
use most often by setting them as the
default. These settings will stay until you
change them again. (See Setting your
changes as the new default on page 24.)
Changing a 2-sided fax layout
3
You need to choose the duplex scanning
format before you send a 2-sided fax. The
format you choose will depend on the layout
of your 2-sided document.
a
Press (FAX).
b
Press d or c to display Duplex Fax.
Press Duplex Fax.
c
Do one of the following:
 If your document is flipped on the
Long edge, press
DuplexScan :LongEdge
.
 If your document is flipped on the
Short edge, press
DuplexScan :ShortEdge
.
d
Press Stop/Exit.
Sending a fax
3
Duplex Fax
Address Book
Fax
Resolution
Off Standard
FAX
Long edge
Portrait Landscape
Short edge
Portrait Landscape