Brother QL-720NW - Manual (Page 38)

Appendix C
33
C
Main Window
C
Exact screen contents depend on your printer model.
1 Menu Bar
Select the commands contained in each menu from the list.
2 Printer
Select the printer to configure.
If only one printer is connected, only that printer is displayed and it is not necessary to select a printer.
3 Wired Node Name/Wireless Node Name
Displays the node name. Node names can be edited.
4 Applicable Settings
Displays setting items. Select the item that you want to configure.
The selected settings that are displayed can be applied to the printer, saved or exported.
5 Settings Display/Change Area
Displays the selected item’s current setting. Change the settings as necessary using the drop-down list
box, direct entry, or other methods.
6 Save Command Settings
Saves network settings in PJL command format. The file extension is “.bin”.
By sending these commands to printers via USB, network settings for printers can be configured in the
same way as when settings are made using the Network Setting Tool (uuUser’s Guide: Mass Storage).
7 Apply
Applies the settings to the printer.
By pressing this button you can apply all the settings set on multiple windows at once.
8 Exit
Exits the Network Setting Tool.
If you close the Network Setting Tool without clicking Apply after changing settings, the settings will not be
applied.
3
5
7
6 8
1
2
4