Brother MFC-J835DW - Manual (Page 4)

4
e
Gently put the paper into the paper tray print
side down and top edge first. Check that the
paper is flat in the tray.
f
Gently adjust the paper side guides to the
paper with both hands. Make sure that the
paper side guides touch the edges of the
paper.
g
Close the output paper tray cover.
h
Slowly push the paper tray completely into the
machine.
i
While holding the paper tray in place, pull out
the paper support a until it clicks, and then
unfold the paper support flap b.
IMPORTANT
Be careful that you do not push the paper in
too far; it may lift at the back of the tray and
cause paper feed problems.
Note
When you use Legal size paper, press and hold
the universal guide release button a as you slide
out the front of the paper tray.
1
1
2