Brother MFC-465CN - Manual (Page 71)

Dialing and storing numbers
55
8
Fax Redial
8
If you are sending a fax manually and the line
is busy, press Redial/Pause, and then press
Black Start or Color Start to try again. If you
want to make a second call to a number you
recently dialed, you can press Redial/Pause
and choose one of the last 30 numbers from
the Outgoing Call List.
Redial/Pause only works if you dialed from
the control panel. If you are sending a fax
automatically and the line is busy, the
machine will automatically redial once after
five minutes.
a
Press Redial/Pause.
b
Press a or b to choose the number you
want to redial.
Press OK.
c
Press a or b to choose Send a fax.
Press OK.
d
Press Black Start or Color Start.
Note
In Real Time Transmission the automatic
redial feature does not work when using
the scanner glass.
Outgoing Call
8
The last 30 numbers you sent a fax to will be
stored in the outgoing call history. You can
choose one of these numbers to fax to, add to
Speed Dial, or delete from the history.
a
Press Redial/Pause.
You can also choose Outgoing Call
by pressing
(Fax).
b
Press a or b to choose the number you
want to call.
Press OK.
c
Do one of the following:
„ To send a fax, press a or b to choose
Send a fax
.
Press OK.
Press Black Start or Color Start.
„ If you want to store the number,
press a or b to choose
Add to Speed Dial
.
Press OK.
(See Storing Speed Dial numbers
from Outgoing Calls on page 57.)
„ Press a or b to choose Delete.
Press OK.
Press 1 to confirm.
d
Press Stop/Exit.
Caller ID history
8
This feature requires the Caller ID subscriber
service offered by many local telephone
companies. (See Caller ID on page 47.)
The last 30 numbers of faxes you received
will be stored in the Caller ID history. You can
choose one of these numbers to fax to, add to
Speed Dial, or delete from the history.
a
Press (Fax).
b
Press a or b to choose
Caller ID hist.
.
Press OK.
c
Press a or b to choose the number you
want to call.
Press OK.