Brother MFC-465CN User Manual

Page 141

Troubleshooting and Routine Maintenance

125

No Paper Fed

The machine is out of paper or
paper is not properly loaded in the
paper tray.

Do one of the following:

Refill the paper in the paper tray, and
then press Black Start or Color Start.

Remove the paper and load it again
and then press Black Start or
Color Start.

The paper is jammed in the
machine.

No Response/Busy

The number you dialed does not
answer or is busy.

Verify the number and try again.

Not Registered

You tried to access a Speed Dial
number that is not programmed.

Out of Memory

The machine's memory is full.

Fax sending or copy operation in
progress

Do one of the following:

Press Stop/Exit and wait until the other
operations in progress finish and then
try again.

Clear the data in the memory. To gain
extra memory, you can turn off
Advanced Fax Operation. (See Turning
off Advanced Fax
Operations on page 65.)

Print the faxes that are in the memory.
(See Printing a fax from the
memory on page 42.)

The memory card or USB flash
memory drive you are using does
not have enough free space to
scan the document.

Delete unused files from your memory card
or USB Flash memory drive to make some
free space and then try again.

Paper Jam

Paper is jammed in the machine.

Open the Jam Clear Cover (at the back of
the machine) and remove the jammed
paper. (See Printer jam or paper
jam on page 128.)

Unable to Clean

Unable to Init. XX

Unable to Print XX

Unable to Scan XX

The machine has a mechanical
problem.

—OR—

A foreign object such as a clip or
ripped paper is in the machine.

Open the scanner cover and remove any
foreign objects inside the machine. If the
error message continues, do one of the
following:

See Transferring your faxes or Fax
Journal report on page 126 before
disconnecting the machine so you will
not lose any important messages.
Then, disconnect the machine from the
power for several minutes and then
reconnect it.

Error Message

Cause

Action