Brother MFC-465CN - Manual (Page 49)

Sending a fax
33
5
Additional sending
operations
5
Sending faxes using multiple
settings
5
When you send a fax you can choose any
combination of these settings: resolution,
contrast, overseas mode, delayed fax timer,
polling transmission and real time
transmission.
a
Press (Fax).
The LCD shows:
b
Press a or b to choose any settings you
want to change.
Press OK.
c
After each setting is accepted, you can
continue to change more settings.
Note
• Most settings are temporary and the
machine returns to its default settings after
you send a fax.
• You can save some of the settings you
use most often by setting them as default.
These settings will stay until you change
them again. (See Setting your changes as
the new default on page 36.)
Contrast
5
If your document is very light or very dark, you
may want to change the contrast. For most
documents the factory setting Auto can be
used. It automatically chooses the suitable
contrast for your document.
Use Light when sending a light document.
Use Dark when sending a dark document.
a
Press (Fax).
b
Press a or b to choose Contrast.
Press OK.
c
Press a or b to choose Auto, Light or
Dark
.
Press OK.
Note
Even if you choose Light or Dark, the
machine will send the fax using the Auto
setting in any of the following conditions:
• When you send a color fax.
• When you choose Photo as the Fax
Resolution.
Changing fax resolution
5
The quality of a fax can be improved by
changing the fax resolution.
a
Press (Fax).
b
Press a or b to choose
Fax Resolution
.
Press OK.
c
Press a or b to choose the resolution
you want.
Press OK.
09012345689
FAX
Fax Start Press
Fax Resolution Standard
Contrast Auto
Speed Dial
Outgoing Call