Brother MFC-J835DW - Manual (Page 17)

Introduction
14
1
Register an account
1
a Press Web on your machine’s LCD.
If information regarding Internet connection is displayed, press OK. You will be asked if you want to
display this information again in the future. Press Yes or No.
NOTE
If there are announcements about new features, and so on, the latest information will be displayed. Read
the information and press OK.
b Choose EVERNOTE
®
.
c Press Register/Delete Account.
If you are registering an account for the first time, or if there are no accounts currently registered, a
message is displayed prompting you to configure the e-mail server settings. Go to step h in Configure
e-mail settings on the machine.
d Press Register Account.
e A message is displayed prompting you to enter the destination e-mail address.
Press OK.
f
Enter the destination e-mail address.
Press OK.
g
A message is displayed prompting you to enter a name for the account as you want it to be displayed on
the LCD.
Press OK.
h Enter the name by using the buttons on the LCD.
Press OK.
i Do one of the following:
 If you want to set a PIN code for the account, press Yes. Then enter a four-digit number and press
OK. (The PIN code prevents unauthorized access to the account.)
 If you do not want to set a PIN code, press No.
j You will be asked if you want to register the account information you entered.
 Press Yes to register.
 Press No to enter the information again. Go back to step f.
k Account registration is complete.
Press OK.
l Press Stop/Exit.
NOTE
Up to 10 accounts can be registered on the machine.