Brother MFC-J835DW User Manual
Page 16

Introduction
13
1
k
In SMTP Port, enter the SMTP port number.
Press OK.
l
In Auth. for SMTP, enter the SMTP authentication method. The setting you choose here will depend
on your ISP:
If your ISP does not use authentication, choose None, and then press OK.
You have finished entering information and are ready to register your EVERNOTE
®
account.
Press OK and then go to step u.
If your ISP uses SMTP authentication, choose SMTP-AUTH, and then press OK. Go to step m.
If your ISP uses POP before SMTP authentication, choose POP bef. SMTP and then press OK.
Go to step o.
m
In Account Name, enter your E-mail account name.
Press OK.
n
In Account Password, enter your E-mail account password, then press OK.
You have finished entering information and are ready to register your EVERNOTE
®
account.
Press OK and then go to step u.
o
In POP3 Server, enter the POP3 server address (for example "mailhost.brothermail.net" or
"192.000.000.001").
Press OK.
p
In POP3 Port, enter the POP3 port number.
Press OK.
q
In Mailbox Name, enter the mailbox name.
Press OK.
r
In Mailbox Pwd, enter the mailbox password.
Press OK.
s
In APOP, set APOP (Authenticated Post Office Protocol) On or Off depending on your ISP's
requirements.
t
Press OK.
You have finished entering information and are ready to register your EVERNOTE
®
account.
Press OK and then go to step u.
u
Do one of the following:
If you are registering an account for the first time, or if there are no accounts currently registered, go
to step f in Register an account.
If you have already registered an account and want to finish the setting, press Stop/Exit.