Brother MFC 9840CDW - Manual (Page 65)

Wireless configuration for Windows ®
55
4
p
If your network is configured for Authentication and Encryption, the following screen will appear. When
configuring your Brother wireless machine, you must ensure that it is configured to match the
Authentication and Encryption settings of your existing wireless network. Choose the
Authentication Method and Encryption Mode from the pull-downs in each setting box. Then enter the
Network key and click Next. Go to r.
Note
• If you want to set more than one WEP key, click Advanced.
• If you do not know the Authentication or Encryption settings for network, contact your network
administrator.
q Enter a new SSID name and choose the Authentication Method and Encryption Mode from the pull-
downs in each setting box. Then enter the Network key and click Next.
Note
If you do not know the Authentication or Encryption settings for network, contact your network
administrator.