Brother HL 2270DW - Manual (Page 24)

24
Macintosh
Wireless Network
Configuration in Infrastructure mode, temporally using a USB or Ethernet
(LAN) cable
8
Configure the wireless
settings and install the
printer driver
a
Turn on your Macintosh. Put the installation
CD-ROM into your CD-ROM drive.
b
Double-click the Start Here OSX icon. Follow
the on-screen instructions.
c
Click Wireless Network Connection and click
Next.
d
Choose No, and then click Next.
e
Read the Important Notice . Check the box
after you confirm the SSID and Network
Key, and then click
Next .
f
For USB cable users, go to g.
(HL-2270DW and HL-2275DW only)
For Ethernet cable users, go to
i.
g
Choose Temporarily use a USB cable
(Recommended) and then click Next.
h
Temporarily connect the USB cable (not
included) directly to the computer and the
machine.
Go to Step m.
IMPORTANT
• You need to temporarily use a USB cable or
Ethernet cable (HL-2270DW and HL-2275DW
only) during configuration (cable not
include).
• You must have the wireless settings you
wrote down for your network in step 7 on
page 15 before you proceed.