Brother MFC 7840W - Manual (Page 47)

Control panel setup
40
3
Relay Domain
3
You can register the Domain Names (Max. 10) that are allowed to request a Relay Broadcast.
a
Press Menu.
b Press a or b to choose LAN.
Press OK.
c Press a or b to choose Setup IFAX.
Press OK.
d
Press a or b to choose Setup Relay.
Press OK.
e
Press a or b to choose Relay Domain.
Press OK.
f Press a or b to choose Relay (01 - 10).
Press OK.
g Enter the Relay Domain name for the Domain that is being allowed to request a Relay Broadcast.
Press OK.
h
Press Stop/Exit.
Relay Report
3
A Relay Broadcast Report can be printed at the machine that will act as a Relay Station for all Relay
Broadcasts.
Its primary function is to print reports of any relayed broadcasts that have been sent through the machine.
Please note: In order to use this function, you must assign the relay domain in the “Trusted Domains” section
of the Relay function settings.
a Press Menu.
b Press a or b to choose LAN.
Press OK.
c Press a or b to choose Setup IFAX.
Press OK.
d
Press a or b to choose Setup Relay.
Press OK.
e Press a or b to choose Relay Report.
Press OK.
f Press a or b to choose On or Off.
Press OK.
g Press Stop/Exit.