Brother MFC 7840W - Manual (Page 19)

Fax operation
12
2
g Choose one of the options below:
If you chose Color150dpi, Color300dpi, Color600dpi, Gray100dpi, Gray200dpi or
Gray300dpi in f, choose the file format (PDF or JPEG) that will be used to send your PC.
If you chose B&W200dpi (B/W200dpi) or B&W200x100 (B/W200x100) in f, choose the file format
(TIFF or PDF) that will be used to send to your PC.
Press OK.
h Choose one of the options below:
„ To store another Speed Dial number go to b.
„ To finish storing Speed Dial numbers, press Stop/Exit.
Note
When you do a broadcast and you have saved a scan profile along with the number or E-mail address,
the scan profile of the One Touch, Speed Dial or Group number you choose first will be applied to the
broadcast.
Changing one touch and speed dial numbers
2
If you try to store a One Touch or Speed Dial number over an existing number, the LCD will show the name
or number already stored there. If your machine has a scheduled job or you have set a fax forwarding number,
the LCD will ask you if you want to change the number.
a
Do one of the following:
„ To change the stored number, press 1.
„ To exit without making a change, press 2.
#005:MIKE
1.Change 2.Exit
b Press a or b to choose Fax/Tel, E-Mail or IFAX.
Press OK.
c
Enter a new number or character.
Press OK.
d
Press d or c to position the cursor under the character you want to change, and then press Clear/Back
to delete it. Repeat for each character you want to delete.