Brother MFC-J615W - Manual (Page 68)

62
Checking the print alignment
A
You may need to adjust the print alignment
after transporting the machine if your printed
text becomes blurred or images become
faded.
a
Press Menu.
b
Press a or b to choose Ink.
Press OK.
c
Press a or b to choose Test Print.
Press OK.
d
Press a or b to choose Alignment.
Press OK.
e
Press Black Start or Color Start.
The machine starts printing the
Alignment Check Sheet.
f
Check the 600 dpi and 1200 dpi test
prints to see if number 5 most closely
matches number 0.
g
Do one of the following:
 If the number 5 samples of both the
600 dpi and 1200 dpi test prints are
the best matches, press 1 (Yes) to
finish the Alignment Check and go to
step j.
 If another test print number is a
better match for either 600 dpi or
1200 dpi, press 2 (No) to choose it.
h
For 600 dpi, press the number of the test
print that most closely matches the
number 0 sample (1-8).
i
For 1200 dpi, press the number of the
test print that most closely matches the
number 0 sample (1-8).
j
Press Stop/Exit.
Checking the ink volume
A
Although an ink volume icon appears on the
LCD, you can use the Menu key to see a
large graph showing the ink that is left in each
cartridge.
a
Press Menu.
b
Press a or b to choose Ink.
Press OK.
c
Press a or b to choose Ink Volume.
Press OK.
The LCD shows the ink volume.
d
Press Stop/Exit.
Note
You can check the ink volume from your
computer. (See Printing for Windows
®
or
Printing and Faxing for Macintosh in the
Software User’s Guide.)