Brother MFC-J615W - Manual (Page 18)

Chapter 3
12
Real Time Transmission
3
When you are sending a fax, the machine will
scan the document into the memory before
sending it. Then, as soon as the telephone
line is free, the machine will start dialing and
sending.
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can do
this by turning on Real Time TX.
a
Press (FAX).
b
Press a or b to choose Real Time TX.
c
Press d or c to choose On (or Off).
Press OK.
Note
• If the memory is full and you are sending a
black & white fax from the ADF, the
machine will send the document in real
time (even if Real Time TX is set to
Off). Faxes from the scanner glass
cannot be sent until you clear some of the
memory.
• In Real Time Transmission, the automatic
redial feature does not work when you are
using the scanner glass.
Overseas Mode
3
If you are having difficulty sending a fax
overseas due to possible interference on the
telephone line, we recommend that you turn
on the Overseas mode. After you send a fax
using this feature, the feature will turn itself
off.
a
Press (FAX).
b
Load your document.
c
Press a or b to choose
Overseas Mode.
d
Press d or c to choose On (or Off).
Press OK.
Delayed Faxing
(Black & White only)
3
You can store up to 50 faxes in the memory
to be sent within 24 hours. These faxes will
be sent at the time of day you enter in step e.
a
Press (FAX).
b
Load your document.
c
Press a or b to choose Delayed Fax.
d
Press d or c to choose On.
Press OK.
e
Enter the time you want the fax to be
sent (in 24-hour format).
(For example, enter 19:45 for 7:45 PM.)
Press OK.
Note
• When you set 12h Clock in the
Date&Time setting, enter the time in
12-hour format.
• The number of pages you can scan into
the memory depends on the amount of
data that is printed on each page.