Brother MFC-J615W - Manual (Page 57)

PhotoCapture Center
®
: Printing photos from a memory card or USB Flash memory drive
51
8
Adjusting Brightness,
Contrast and Color
8
Brightness
8
a
Press a or b to choose Brightness.
b
Press d to make a darker print or press
c
to make a lighter print.
Press OK.
c
If you do not want to change additional
settings, press Color Start to print.
Contrast
8
You can choose the contrast setting.
Increasing the contrast will make an image
look sharper and more vivid.
a
Press a or b to choose Contrast.
b
Press c to increase the contrast or press
d
to decrease the contrast.
Press OK.
c
If you do not want to change additional
settings, press Color Start to print.
Color Enhancement (True2Life
®
)
8
You can turn on the color enhancement
(True2Life
®
) feature to print more vivid
images. Printing time will be slower.
a
Press a or b to choose True2Life.
Press OK.
b
Do one of the following:
 If you want to customize the
White Balance, Sharpness or
Color Density, press d or c to
choose On, and then go to step c.
 If you do not want to customize,
press d or c to choose Off.
Press OK and then go to step f.
c
Press a or b to choose
White Balance, Sharpness or
Color Density.
d
Press d or c to adjust the degree of the
setting.
Press OK.
e
Do one of the following:
 If you want to customize another
color enhancement, press a or b to
choose another option.
 If you want to change other settings,
press a or b to choose Exit, and
then press OK.
f
If you do not want to change additional
settings, press Color Start to print.
Note
• White Balance
This setting adjusts the hue of the white
areas of an image. Lighting, camera
settings and other influences will affect the
appearance of white. The white areas of a
picture may be slightly pink, yellow or
some other color. By using this setting,
you can correct that effect and bring the
white areas back to pure white.
• Sharpness
This setting enhances the detail of an
image, similar to adjusting the fine focus
on a camera. If the image is not in true
focus and you cannot see the fine details
of the picture, then adjust the sharpness.
• Color Density
This setting adjusts the total amount of
color in the image. You can increase or
decrease the amount of color in an image
to improve a washed out or weak picture.