Brother HL-6180DW - Manual (Page 2)

2
WARNING
• Plastic bags are used in the packing of your machine. Plastic bags are not toys. To avoid the danger
of suffocation, keep these bags away from babies and children and dispose of them correctly.
• If you use a Lower Tray, DO NOT carry the machine with the Lower Tray as you may be injured or cause
damage to the machine because it is not attached to the Lower Tray.
WARNING indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injuries.
CAUTION indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injuries.
Note
• Keep a minimum gap around the machine as shown in the illustration.
• The components included in the box may differ depending on your country.
• We recommend that you save the original packaging.
• If for any reason you must ship your machine, carefully repack the machine in the original packaging to avoid
any damage during transit. The machine should be adequately insured with the carrier. For how to repack
the machine, see Packing and shipping the machine in the User's Guide.
• Illustrations in this Quick Setup Guide are based on the HL-5470DW.
• The interface cable is not a standard accessory. Buy the appropriate interface cable for the connection you
want to use (USB or Network).
USB cable
It is recommended to use a USB 2.0 cable (Type A/B) that is no longer than 2 meters (6 feet).
Network cable
For HL-5470DW(T), use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T,
100BASE-TX Fast Ethernet Network.
For HL-6180DW(T), use a straight-through Category 5e (or greater) Shielded Twisted-Pair (STP) cable for
10BASE-T, 100BASE-TX Fast Ethernet Network or 1000BASE-T Gigabit Ethernet Network. When you
connect the machine to a Gigabit Ethernet Network, use the network devices complying with 1000BASE-T.
WARNING
CAUTION
150 mm
(6 in.)
150 mm
(6 in.)
150 mm
(6 in.)
150 mm (6 in.)