Brother HL-6180DW - Manual (Page 15)

15
Macintosh
Wired Network
Windows
®
Macintosh
Wired Ne
twork
For Wired Network Interface Cable Users for Macintosh
9
Before you install
a
Make sure your machine is connected to the
power and your Macintosh is ON. You must be
logged on with Administrator rights.
b
Remove the protective cap from the Ethernet
port marked with a symbol.
c
Connect the network interface cable to the
Ethernet port, and then connect it to a free port
on your hub.
d
Make sure your machine's power switch is on.
10
Install the printer driver
a
Put the installer CD-ROM into your CD-ROM
drive.
b
Double-click the Start Here OSX icon. If
prompted, select your model.
c
Choose Wired Network Connection
(Ethernet) and then click Next. Follow the
on-screen instructions.
d
Choose your machine from the list, and then
click OK.
Important
For users of Mac OS X 10.5.7 or lower, upgrade
to Mac OS X 10.5.8 - 10.7.x. (For the latest
drivers and information for the Mac OS X you are
using, visit http://solutions.brother.com/.)
Note
If you want to add the PS driver (BR-Script3
printer driver), please go to the Brother Solutions
Center at http://solutions.brother.com/ and visit
FAQ's on your model page for instructions.
Note
It may take a few minutes for the installation to
complete.
Note
• If there is more than one of the same model
connected on your network, the MAC Address
(Ethernet Address) will be displayed after the
model name.
• You can find your machine’s MAC Address
(Ethernet Address) and IP Address by printing
out the Printer Settings Page. See Print the
Printer Settings Page on page 31.