Brother HL-6180DW - Manual (Page 10)

10
Macintosh
USB
For USB Interface Cable Users for Macintosh
9
Before you install
a
Make sure your machine is connected to the
power and your Macintosh is ON. You must be
logged on with Administrator rights.
b
Connect the USB cable to the USB port
marked with the symbol on your machine,
and then connect the cable to your Macintosh.
c
Make sure your machine's power switch is on.
10
Install the printer driver
a
Put the installer CD-ROM into your CD-ROM
drive.
b
Double-click the Start Here OSX icon. If
prompted, select your model.
c
Choose Local Connection (USB) and then
click Next. Follow the on-screen instructions.
d
Choose your machine from the list, and then
click OK.
e
When this screen appears, click Next.
Important
For users of Mac OS X 10.5.7 or lower, upgrade
to Mac OS X 10.5.8 - 10.7.x. (For the latest
drivers and information for the Mac OS X you are
using, visit http://solutions.brother.com/.)
Note
If you want to add the PS driver (BR-Script3
printer driver), please go to the Brother Solutions
Center at http://solutions.brother.com/ and visit
FAQ's on your model page for instructions.
Note
It may take a few minutes for the installation to
complete.
Note
When the Brother Support screen appears,
make your selection and follow the on-screen
instructions.
Finish
The installation is now
complete.