Brother HL 2270DW - Manual (Page 19)

Printing Methods
15
1
e Choose the following from each drop-down list of the printer driver.
 Paper Size
You can use all paper sizes specified for the tray which you use.
 Media Type
 Paper Source
For any other settings, see Driver and Software in Chapter 2.
f Send the print data to the machine.
g After the printed page comes out of the machine, put in the next sheet of paper as in Step d above.
Repeat for each page that you want to print.
Printing on labels or envelopes
1
When the face-up output tray is pulled down, the machine has a straight paper path from the manual feed
slot through to the back of the machine. Use this paper feed and output method when you want to print on
labels or envelopes. (For the recommended paper to use, see Acceptable paper and other print media
on page 3 and Types of envelopes to avoid on page 7.)
Note
The machine automatically turns on the Manual Feed mode when you put paper in the manual feed slot.
a Open the back cover (face-up output tray).
Width: 76.2 to 216 mm (3 to 8.5 in.)
Length: 116 to 406.4 mm (4.6 to 16 in.)
Plain Paper Thin Paper Thick Paper Thicker Paper Bond Paper Recycled Paper
Manual