Macintosh wireless network, Finish – Brother MFC-J410W User Manual
Page 31
31
Macintosh
Wireless Network
Windows
®
Macinto
sh
Wirele
ss Network
e
Please wait, it will take a few seconds for the
software to install. After the installation, this
window will appear.
Choose your machine from the list, and then
click OK.
f
When this screen appears, click Next.
g
When the Brother Support screen appears,
click Close to finish the installation or go to
step
22.
22
Download and install
Presto! PageManager
When Presto! PageManager is installed OCR
capability is added to Brother ControlCenter2. You
can easily scan, share and organize photos and
documents using Presto! PageManager.
a
Click the Presto! PageManager icon to go to
the Presto! PageManager download site, and
follow the on-screen instructions.
23
Install MFL-Pro Suite on
additional computers
(if needed)
If you want to use your machine with multiple
computers on the network, install MFL-Pro Suite on
each computer. Go to step
Note
If your wireless settings fail, the Wireless Device
Setup Wizard will appear during the installation of
MFL-Pro Suite. Confirm your settings by following
the on-screen instructions. If you encounter this
failure, go to step
18-a on page 21 and setup the
wireless connection again.
Note
If this screen appears click OK.
Enter a name for your Macintosh in
Display Name up to 15 characters long and click
OK. Go to
The name you enter will appear on the machine’s
LCD when you press the SCAN key and choose
a scan option. (For more information, see
Network Scanning (For models with built-in
network support) in the Software User’s Guide on
the documentation CD-ROM.)
Finish
The installation is now
complete.
Note
• If you specify an IP Address for the machine,
you must set the Boot Method to Static by using
the control panel. For more information, see
the Network User’s Guide on the
documentation CD-ROM.
• To use Image Capture on Mac OS X 10.6.x,
please install the CUPS Printer Driver, which
can be downloaded from the Brother Solutions
Cent