Brother MFC-J450DW - Manual (Page 74)

60
e
Press Black Start or Color Start.
The machine starts printing the
Alignment Check Sheet.
f
For the “A” pattern, press the number of
the test print that has the least visible
vertical stripes (1-9).
Repeat this step for the B, C and D
patterns.
In the example number 6 is the best
choice for A, B, C and D.
g
Press Stop/Exit.
NOTE
Setting the date and
time
A
The LCD shows the date and time. If it is not
current, re-enter it here.
You can add the date and time to each fax
you send by setting your Station ID.
a
Press Menu.
b
Press a or b to choose
Initial Setup.
Press OK.
c
Press a or b to choose Date & Time.
Press OK.
d
Press a or b to choose Date & Time.
Press OK.
e
Enter the last two digits of the year using
the dial pad, and then press OK.
f
Enter the two digits for the month using
the dial pad, and then press OK.
g
Enter the two digits for the day using the
dial pad, and then press OK.
h
Press a or b to choose 12h Clock or
24h Clock, and then press OK.
i
To enter the time, do one of the
following:
 If you chose 12h Clock in step h,
enter the time (in 12-hour format)
using the dial pad, and then press
OK.
Press a or b to choose AM or PM, and
then press OK.
 If you chose 24h Clock in step h,
enter the time (in 24-hour format)
using the dial pad, and then press
OK
(For example, enter 19:45 for 7:45
PM.)
j
Press Stop/Exit.
i
When the print
alignment is not
adjusted properly,
text looks blurry
like this. After the print
alignment is
adjusted properly,
text looks like this.