Brother MFC-J450DW - Manual (Page 106)

92
Machine Information
B
Checking the serial number
B
You can see the machine’s serial number on
the LCD.
a
Press Menu.
b
Press a or b to choose Machine Info.
Press OK.
c
Press a or b to choose Serial No.
Press OK.
Your machine’s serial number will
appear on the LCD.
d
Press Stop/Exit.
Checking the firmware
version
B
You can see the machine’s firmware version
on the LCD.
a
Press Menu.
b
Press a or b to choose Machine Info.
Press OK.
c
Press a or b to choose Version.
Press OK.
Your machine’s firmware version will
appear on the LCD.
d
Press Stop/Exit.
Reset functions
B
The following reset functions are available:
1 Machine Reset
You can reset all the machine’s settings
that you have changed, such as Date and
Time and Ring Delay.
2 Network
You can reset the print server back to its
default factory settings, such as the
password and IP address information.
3 Address&Fax
Address & Fax resets the following
settings:
 Speed Dial
(Speed-Dial and Setup Groups)
 Station ID
(Name and Number)
 Report settings
(Transmission Verification Report,
Speed Dial and Fax Journal)
 History
(Caller ID history and Outgoing Call)
 Faxes in memory
4 All Settings
You can restore all settings to the factory
setting.
Brother strongly recommends performing
this procedure before handing over or
disposing of the machine.