11 configure the wireless settings, For wireless network users, Macintosh and mobile devices) – Brother HL-3140CW User Manual
Page 24: Configure the wireless settings
24
For Wireless Network Users
One-push setup using WPS (Wi-Fi Protected Setup) or AOSS™
(Windows
®
, Macintosh and mobile devices)
11
Configure the wireless
settings
a
Confirm that your wireless access point/router
has the WPS or AOSS™ symbol as shown
below.
b
Place the Brother machine within range of your
WPS or AOSS™ access point/router. The
range may differ depending on your
environment (see the instructions provided with
your wireless access point/router).
If you began the wireless setup from step
page 6, go to
c.
c
On your machine, press a or b to choose
Network and press OK.
Press a or b to choose WLAN and press OK.
d
Press a or b to choose WPS/AOSS and press
OK.
When WLAN Enable? is displayed, press a to
accept. This will start the wireless setup wizard.
To cancel the wireless setup wizard and exit,
press Cancel.
e
When Press Key on rtr appears, press
the WPS or AOSS™ button on your wireless
access point/router (for more information, see
the instructions provided with your wireless
access point/router), and then press a on your
machine.
This feature will automatically detect which
mode (WPS or AOSS™) your wireless access
point/router uses to configure your machine.
f
A connection result message appears on the
LCD and a WLAN report will automatically be
printed.
If the connection failed, check the error code on
the printed report and refer to
Troubleshooting on page 25.
Press OK.
To install the printer driver, continue to
step
12.
For Windows
®
Users:
Now go to
For Macintosh Users:
Now go to
NOTE
If your wireless access point/router supports WPS
(PIN Method) and you want to configure your
machine using the PIN (Personal Identification
Number) Method, see Network User's Guide:
Configuration using the PIN Method of WPS
(Wi-Fi Protected Setup).
Wireless setup is now complete.
A four-level indicator at the right of your
machine’s LCD will show the wireless
signal strength of your wireless access
point/router.
NOTE
For Mobile Device users, see the Advanced
Network User's Guides for details on how to use
your machine with your mobile device(s). To
download the User’s Guide for the application you
are using, visit the Brother Solutions Center at
your model's page.