Brother MFC-J4510DW - Manual (Page 7)

Introduction
4
1
Conditions for using Brother Web Connect
1
Service account
1
In order to use Brother Web Connect, you must have an account with the desired service. If you do not
already have an account, use a computer to access the website of the service and create an account.
Internet connection
1
In order to use Brother Web Connect, your Brother machine must be connected to a network that has access
to the Internet through either a wired or wireless connection. See the Quick Setup Guide to connect and
configure the machine appropriately.
For network setups that use a proxy server, the machine must also be configured to use a proxy server (see
Proxy server settings on page 4).
NOTE
A proxy server is a computer that serves as an intermediary between computers without a direct Internet
connection, and the Internet.
MFL-Pro Suite installation
1
The initial installation of Brother Web Connect requires a computer that has access to the Internet and has
Brother MFL-Pro Suite installed. Follow the steps outlined in the Quick Setup Guide to install the MFL-Pro
Suite (from the supplied installer CD-ROM) and configure the machine to be able to print over your wired or
wireless network.
Proxy server settings
1
If the network uses a proxy server, the following proxy server information must be configured on the machine:
 Proxy server address
 Port number
 User name
 Password
For MFC-J2510/J4510DW/J4710DW
1
a
Press .
b
Press All Settings.
c Swipe up or down, or press a or b to display Network.
Press Network.