Brother MFC-J630W - Manual (Page 22)

Chapter 1
8
LCD screen
1
The LCD shows the current machine status
when the machine is idle.
1 Faxes in memory
Shows how many received faxes are in the
memory.
2 Wireless Status
A four level indicator shows the current
wireless signal strength if you are using a
wireless connection.
3 Current Receive Mode
Lets you see the current receive mode.
 Fax (Fax only)
 F/T (Fax/Tel)
 TAD (External TAD)
 Mnl (Manual)
4 Memory Status
Lets you see the available memory in the
machine.
5 Ink indicator
Lets you see the available ink volume.
The warning icon appears when there is
an error or maintenance message. For
details, see Error and Maintenance
messages on page 56.
Basic Operations
1
The following steps show how to change a
setting in the machine. In this example the
Mode Timer setting is changed from
2 minutes to 30 seconds.
a
Press Menu.
b
Press a or b to choose
General Setup.
Press OK.
c
Press a or b to choose Mode Timer.
d
Press d or c to choose 30Secs.
Press OK.
You can see the current setting on the
LCD:
e
Press Stop/Exit.
0 Max
110:2 0:29
01.01.201 1.01.2010 01.01.2010
10:29
Fax Mem.
1 2 3 4 5
00
MENU MENU
Ink
OK
OK General Setup
Fax
Network
Select & Press
General Setup General Setup
Mode Timer 30Secs
Paper Type Plain Paper
Select & Press
Paper Size Letter
Volume
OK
General Setup General Setup
Mode Timer 30Secs
Paper Type Plain Paper
Select & Press
Paper Size Letter
Volume
OK