Brother DCP 1000 - Manual (Page 36)

4 - 2 C U S T O M S E T T I N G S
YL4DCP-1000-FM5.5
Sleep Mode
Setting the Sleep Mode reduces power consumption while the machine is idle.
You can choose how long the machine is idle (from 00 to 99 minutes) before it
drops into sleep mode. The timer automatically resets itself after the machine
receives a PC data, or makes a copy. The default setting is 0 minutes.
1 Press Menu/Set, 1, 2.
2 Use the numeric keys to enter the length
of time the machine is idle before it drops
into sleep mode (00 to 99 minutes),
and then press Menu/Set.
3 Press Stop/Exit.
Setting the Print Density
You can adjust print density, making your printed documents darker or lighter.
The new setting will remain until you change it again.
1 Press Menu/Set, 1, 3.
2 Press to make print darker or to
make print lighter, and then press
Menu/Set.
3 Press Stop/Exit.
2.SLEEP MODE
3.PRINT DENSITY