Brother PT-E500 - Manual (Page 49)

TROUBLESHOOTING
48
What to do when...
When printing multiple
copies of a label, a
message is displayed
to confirm whether you
want the labels to be
cut after each label is
printed.
Because the cut labels must not remain in the tape exit slot, the
message is displayed.
To disable the message display, press the Menu key, select
"Cut Pause" using the or key, and then press the OK or
Enter key.
I do not know the
version number of the
firmware for the
P-touch labeling
system.
The version number and other information for the firmware can
be confirmed using the following procedure. Press the Menu
key, select "Version Info." using the or key, and then press
the OK or Enter key.
Problem Solution