Brother QL-500 - Manual (Page 10)

Introduction 10
„ Power Cord
Follow the followings to avoid fire, damage, and electric shock.
Use only the authorized power source
(120VAC) for the printer.
Do not plug too many leads into a single
socket.
Do not damage or modify the power cord
or plug. Also, do not place furniture or
any heavy objects onto it, bend or pull it
by constraint.
Do not use the power cord when it is
damaged.
Do not touch the power cord or plug with
wet hands.
Insert the power plug completely.
Do not insert the power cord into
dilapidated power outlet.
Do not use the extension cord which
does not have a ground wire. The
protection function will be invalid.
Caution
„ The Printer
Follow the followings to avoid personal injury and damage of the printer.
The standard electrical outlet shall be installed near the printer and shall be easily
accessible.
„ Power Cord
Follow the followings to avoid personal injury and damage of the printer.
If the printer will not be used for an
extended period, remove the power
supply cord from the electrical outlet.
Always hold the power plug when
removing the power cord from or
inserting it into the outlet. Pulling on the
power cord could cause a problem with
the power cord.
Warning