Brother PJ-623 - Manual (Page 28)

２ -２ Command details
ESC i a n
[ N a m e ] Switch command mode
[ C o d e ] 1Bh
69h 61h nnh
[Function] Switches the command mode.
[Details] When
setting nnh is:
00h or 30h: ESC/P mode/Raster mode (default)
03h or 33h: P-touch Template mode
If a setting other than those listed above is specified, ESC/P mode or raster
mode will be entered.
Example: 1Bh 69h 61h 00h Specifies ESC/P mode.
ESC i S
[ N a m e ] Request printer status
[ C o d e ] 1Bh 69h 53h
[Function] Requests the printer status.
[Details] *Refer to the P-Touch Template Command Reference.
ESC ~ e F 1 n1 n2
[ N a m e ] Reverse feed
[ C o d e ] 1Bh 7Eh 65h 46h 01h n1h n2h
[Function] Reverse feeds the paper by the specified number of lines.
[Details] The number of lines is specified with the two bytes n1h n2h.
However, n1h is the least significant byte and n2h is the most significant byte.
The setting range for the number of lines is:
At 300 dpi: 24 to 12,000 dots
At 200 dpi: 18 to 8,000 dots
Example: 1Bh 7Eh 65h 46h 01h 04h 10h
Specifies the number of lines as 1004h = 4,100 dots.
©Copyright 2011 BROTHER INDUSTRIES, LTD.
28