Brother PJ-623 - Manual (Page 19)

6. Character style commands
ESC x n
[ N a m e ] Select text quality
[ C o d e ] 1Bh 78h nnh
[Function] Selects draft or high quality for alphanumeric characters.
[Details] n = 00h or 30h: Draft mode (1/120" movement amount)
n = 01h or 31h: Letter mode (1/180" movement amount)
Since this printer is not installed with a draft font, the text quality does not
change.
However, the setting for this command is used for the units of the movement
amount when the ESC ¥ (ESC
\) command is received.
SI, ESC SI
[ N a m e ] Specify reduced characters
[ C o d e ] 0Fh, 1Bh 0Fh
[Function] The width of proportional characters is halved (10 cpi→16.67 cpi and 12 cpi →
20 cpi).
[Details] Ignored if 15 cpi is specified.
DC2
[ N a m e ] Cancel reduced characters
[ C o d e ] 12h
[Function] Cancels reduced characters specified with the SI or ESC SI command.
SO, ESC SO
[ N a m e ] Specify auto-cancelling double-width characters
[ C o d e ] 0Eh, 1Bh 0Eh
[Function] Specifies auto-cancelling double-width enlargement for alphanumeric characters.
[Details] Cancelled with the DC4, CR, LF, FF, VT or ESC W 0 command.
DC4
[ N a m e ] Cancel auto-cancelling double-width characters
[ C o d e ] 14h
[Function] Cancels auto-cancelling double-width enlargement for alphanumeric characters.
[Details] Double-width enlargement specified with ESC W 1 is not cancelled.
ESC W n
[ N a m e ] Specify/cancel double-width characters
[ C o d e ] 1Bh 57h nnh
[Function] Specifies or cancels double-width enlargement for alphanumeric characters.
[Details] n = 00h or 30h: Cancel double-width enlargement and auto-cancelling
double-width enlargement
n = 01h or 31h: Specify double-width enlargement
©Copyright 2011 BROTHER INDUSTRIES, LTD.
19