Brother PJ-623 - Manual (Page 16)

5. Character selection commands
ESC k n
[ N a m e ] Select font
[ C o d e ] 1Bh 6Bh nnh
[Function] Switches the half-width alphanumeric font that is used between “Courier” and
“Sans Serif”.
[Details] n = 30h, 00h: Courier
n = 31h, 01h: Sans Serif
ESC P
[ N a m e ] Specify 10 cpi
[ C o d e ] 1Bh 50h
[Function] Uses the character set at 10 cpi.
[Details]
ESC M
[ N a m e ] Specify 12 cpi
[ C o d e ] 1Bh 4Dh
[Function] Uses the character set at 12 cpi.
[Details] (The default is 12 cpi.)
ESC g
[ N a m e ] Specify 15 cpi
[ C o d e ] 1Bh 67h
[Function] Uses the character set at 15 cpi.
[Details] The “specify reduced characters” is cancelled.
ESC p n
[ N a m e ] Apply/cancel proportional characters
[ C o d e ] 1Bh 70h nnh
[Function] Applies or cancels proportional characters for alphanumeric characters.
[Details] n=00h or 30h: Cancel proportional characters
n=01h or 31h: Apply proportional characters
If a download character set is selected, characters are printed with the width of
the defined download character when proportional characters are applied.
©Copyright 2011 BROTHER INDUSTRIES, LTD.
16