Brother PJ-623 - Manual (Page 12)

2. Print area setting commands
ESC C n
[ N a m e ] Specify page length in lines
[ C o d e ] 1Bh
43h nnh
[Function] Specifies the page length as ((line feed amount when this command is specified)
* (n in lines)) inches.
[Details] Settings that exceed 22 inches or
are less than the sum of the top space (top margin) and bottom space (page
length – bottom margin) are ignored.
In addition, skip perforation is cancelled.
The default value is 66 lines. (The default page length is 11 inches.)
ESC C 0 n
[ N a m e ] Specify page length in inches
[ C o d e ] 1Bh
43h 00h nnh
[Function] Specifies the page length as n inches.
[Details] Settings that exceed 22 inches or
are less than the sum of the top space (top margin) and bottom space (page
length – bottom margin) are ignored.
In addition, skip perforation is cancelled.
The default value is 11 inches.
ESC N n
[ N a m e ] Specify skip perforation
[ C o d e ] 1Bh 4Eh nnh
[Function] Specifies ((number of line feeds n) * (line feed amount when this command is
specified)) as the amount to be skipped.
[Details] Values that exceed the page length are ignored.
The print area is the area remaining when the skip amount is subtracted from the
specified page length.
Cancelled with the ESC O, ESC C or ESC C 0 command.
ESC O
[ N a m e ] Cancel skip perforation
[ C o d e ] 1Bh
4Fh
[Function] Sets the skip amount to 0. (Cancels skip perforation.)
©Copyright 2011 BROTHER INDUSTRIES, LTD.
12