Setra System 260 - Manual (Page 2)

RETURNING PRODUCTS FOR REPAIR
Please contact a Setra application engineer (800-257-3872, 978-263-1400) before returning unit for repair to review information relative to your
application. Many times only minor field adjustments may be necessary. When returning a product to Setra, the material should be carefully packaged
and shipped prepaid to:
Setra Systems, Inc.
159 Swanson Road
Boxborough, MA
01719-1304
Attn: Repair Department
To download return form, please visit www.setra.com/tra/repairs/cal_rep
To assure prompt handling, please supply the following information and include it inside the package or returned material:
1. Name and phone number of person to contact.
2. Shipping and billing instructions.
3. Full description of the malfunction.
4. Identify any hazardous material used with product.
Allow approximately 3 weeks after receipt at Setra for the repair and return of the unit.
Non-warranty repairs will not be made without customer approval and a purchase order to cover repair charges.
Calibration Services
Setra maintains a complete calibration facility that is traceable to the National Institute of Standards & Technology (NIST). If you would like to recalibrate or recer-
tify your Setra pressure transducers or transmitters, please call our Repair Department at 800-257-3872 (978-263-1400) for scheduling.
WARRANTY AND LIMITATION OF LIABILITY
SETRA warrants its Model 260 Transducer products to the original consumer purchaser against defects for a period of one year from the date of sale by SETRA,
as shown in its shipping documents.
Without charge, SETRA will repair or replace products found to have manufacturing defects within the warranty period.
The serial number or date code must not have been removed, defaced or otherwise changed. SETRA must be notified in advance of any returns; any products returned to SETRA must be transportation
prepaid.
The foregoing warranty is in lieu of all warranties, express, implied or statutory, including but not limited to, any implied warranty of merchantability for a particular purpose.
SETRA’s liability for breach of warranty is limited to repair or replacement, or if the goods cannot be repaired or replaced, to a refund of the purchase price. SETRA’s liability for all other breaches is limited to a
refund of the purchase price. In no instance shall SETRA be liable for incidental or consequential damages arising from a breach of warranty, or from the use or installation of its products.
No representative or person is authorized to give any warranty other than as set out above or to assume for SETRA any other liability in connection with the sale of its products.
For all CE technical questions, contact Setra Systems, USA. EU customers may contact our EU representative Hengstler GmbH, Uhlandstr. 49, 78554 Aldingen, Germany
(Tel: +49-7424-890, Fax: +49-7424-89500).
Toll Free: 1-800-257-3872 Fax: 1-978-264-0292
Web Site: www.setra.com
PERFORMANCE SPECIFICATIONS
Accuracy RSS * (at constant temperature.) ±1% FS
*RSS of Non-Linearity, Non-Repeatability and Hysteresis.
Thermal Effects
Compensated Range °F(°C) +32 to +122°F (0 to 50)
Zero/Span Shift %FS/°F(°C) 0.03 (0.054)
Maximum Line Pressure 10 PSI
Warm-up Shift ±0.2% FS total
Position Effects
(Unit is factory calibrated at 0g effect in the vertical position)
Zero Offset (%FS/G) 0.2%
SS260 R
ev
.B 07/26/2011